Ningbo Nide Tech Co., Ltd
NINGBO NIDE TECH CO.,LTD We specialize in the field of electric motors, covering motor manufacturing machinery, DC motor,commutator,ball bearing and carbon brush.
Add to Cart
Compression motor auto stator end coil lacing machine
Quick Detail:
1.This machine will automatically feeding and cutting and lacing.
3.PLC and touch screen control.
4. It is controlled by servo system.
Description:
Each lacing machine is PLC controlled with an inverter drive and can be fully programmed to suit different stator slot configurations. Stator support tooling is very quick to changeover between different stator laminations and stack heights. A wide range of standard lacing needles are available. This lacing machine is suitable for lacing multi-species, less yield or more lead wire stator. This stator coil end lacing machine adopts vertical loading structure, Main spindle speed is adjustable.
Machine structure
This machine is consist of machine body, needle, nozzle rotating part, needle fore and back movement,nozzle swing part, needle up and down movement part, stator indexing part,thread feeding,thread cutting part.
Lacing machine technical data
| Min. stator ID | 33mm |
| Max. stator OD | 150mm |
| Over-hang height | 15~48mm |
| Stator stack length | 15~120mm |
| Pitch time | About 0.5~0.7sec/slot |
| Power supply | 380V/50/60Hz |
| Air pressure | 0.5~0.8MPa |
| Power | 3KW |
| Dimension | 1570 x 670 x 1680mm |
| Weight | About 900kg |
Applications:
This machine is appropriate for micro induction motor like conditioner motor, washer motor, compressor motor, fan motor, alternator motor, pump motor etc.
Information needed for stator lacing machine inquiry
It will be better if customer could send us detailed drawing including below information.
1. Stator lamination drawing
2. Stator stack drawing
3. Stator winding drawing
4.Winding drawing
5. Other technical requirement
If possible, it will be better if customer can send us samples.
Stator lacing machine working table
