Ningbo Nide Tech Co., Ltd
NINGBO NIDE TECH CO.,LTD We specialize in the field of electric motors, covering motor manufacturing machinery, DC motor,commutator,ball bearing and carbon brush.
Add to Cart
Programmable automatic stator end coil lace machine Single working station
This stator coil end lacing machine is especially applied to multi sizes, low output or more lead stator winding lacing. Stator is loaded on this coil lacing machine vertically. The lacing wokring process, such as single-needle and single-side automatic lacing; needle transpositioning, hooking, are all controlled by servo system. Machine is PLC programming, with an inverter drive and can be fully programmed to suit different stator slot configurations. The lacing type, like slot by slot lacing, intercal lacing, and fancy lacing could be set in the touch srceen.
Machine speicification:
| Stator ID | φ35-φ120 |
| Statro OD | less than 190mm |
| Stator lamination height | 40-160mm |
| Max winding height | 60MM |
| Lacing speed | 0.8S/slot |
| Lacing mode | slot by lsot/interval slot/fancy lacing |
| Power | 3800V 50-60HZ |
| Air pressure | >0.4mpa |
| Weight | 450KG |
| Dimension | 1000x600x1300 |
Applications:
This machine is suitable for stator used in induction motor industry. This lacing manchine is especially applied to multi sizes, low output or more lead stator winding lacing.
Information needed for stator lacing machine inquiry
It will be better if customer could send us detailed drawing including below information.
1. Stator lamination drawing
2. Stator stack drawing
3. Stator winding drawing
4.Winding drawing
5. Other technical requirement
If possible, it will be better if customer can send us samples.
6. The tooling is movable, and convenient for stator fast laoding and unloading.
The stator coil lacing machine working process
Stator made by this lacing machine